• Photo - Primary
  • User 1
  • User 2
  • User 3
  • User 4
  • User 5
  • User 6
  • User 7
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • User 9
  • Photo - Unmounted
  • Logo Image

DV8 Offroad MTO Series Rear Bumper For 2021+ Ford Bronco - RBBR-01

DVERBBR-01

Low stock! Only 6 left
Usually Ships In: 24-72 Hours
$999.99
$999.99
Shipping calculated at checkout.

FREE SHIPPING on most orders over $249 in US 48

Sorry, it's out of stock.

But we can let you know when it's back in.

Question about this product?

We're happy to help.

CA WARNING: Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information go to www.P65Warnings.ca.gov/motor-vehicle-parts.

2021-2024 Ford Bronco | MTO Series Rear Bumper

This Bronco Rear Bumper is part of the MTO Series (Made to Overland), and is compatible with all Bronco trim levels. Manufactured from high grade steel, it was designed to protect the rear end while maintaining high ground clearance. DV8 has placed the license plate mount at the side of the bumper, in order to accommodate the Sasquatch package 35-inch tires, and to ensure the tail gate swings open freely. The bumper can fit up to a 37-inch tire on the OEM carrier above. To keep full visibility of the third brake light with a 37" spare, use their third brake light extension. Included with the new license plate bracket are license plate lights.

Two 3-inch flush mount pod lights can be mounted towards either side of the bumper. These can be wired to the reverse lights, or to a separate wiring harness in order to provide supplemental lighting at the rear of your Bronco while on the trail. There are 2 clevis mounts that take 3/4-inch D-ring shackles to provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.

Mix and match any DV8 front & rear bumper to fit your style. DV8 bumpers were designed to look great together no matter which combination you choose.

Key Features:

  • (2) Mounts for 3" Flush Mount Pod Lights
  • Reinforced D-Ring Mounts
  • 2-Stage Micro-Texture Black Powder Coating
  • Retains Factory Backup Sensors
  • 4mm Body and 5mm Mounts/Supports
  • Paintable Aluminum Mesh Panels
  • Accommodates up to 37" Spare Tire on OEM carrier
  • Compatible with Factory Tow Hitch

Flush Mount Pod Light Mounts
This bumper has two rear facing mounts that will fit any 3" flush mount pod light.

Retains Factory Backup Sensors
The MTO series rear bumper is made to accept both style Bronco parking sensors (from both the metal and plastic factory bumper options). If your model did not come with parking sensors, we include parking sensor plugs to fill those holes.

Mounting Points For 3/4" D-Rings
Two reinforced mounting points for 3/4-inch D-rings provide recovery options if you manage to get stuck on the trail.

Paintable Mesh Inserts
The aluminum mesh inserts on the MTO series rear bumper are completely bolt-on and easily removable so you can paint them any custom color you'd like.

Installation

PDF IconPDF Instructions

Installation Instructions

Fitment

DV8 Offroad MTO Series Rear Bumper For 2021+ Ford Bronco - RBBR-01

$999.99
  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
F
Fred P.

First, this is a heavy duty bumper, both heavy and strong. The installation went pretty smoothly, but there were differences between my stock bumper and the one in the instructions and this should be noted as Ford has more than 1 bumper this can replace. I have a 2024 Wildtrak
As a result, I had to modify the wiring harness Unwrap a bunch of electrical tape) to extend the distance between the 2 inner parking sensors to allow them to reach the holes in the new bumper. The outer bezels are also different, but did fit the new bumper. The modification for thickness was also different and the sensor retainer were different than the instruction. Might want to note this in the instruction.
The mounting to vehicle went smooth and fit is great, easy to get aligned as I wanted it.
The connections of the harness to the car require attention. This is a common problem noted in the internet, that the o-ring type seals in the connector get pushed into the connector making it impossible to reconnect the harness without removing the o-rings, lubricating them and repositioning them so the connector can go together. This took me some time to figure out.

Lastly, the bumper has holes to receive flush mount lights, if you do not order lights (like me), they are just holes with no cover. I asked DV8 if they sell covers for this, and have not heard back. I will need to make my own.

The bumper looks great and ready to hit the trails (and rocks). I am very happy with it.

Questions about this product?
Our Experts are here to help

Get in touch