Injen Evolution Cold Air Intake (Oiled Air Filter) For 2021-22 Ford Bronco V6-2.7L Twin Turbo - EVO9301C

Injen EVOLUTION Cold Air Intake System (Oiled Air Filter) - EVO9301C

Key Features:

• Direct Fit for 2021-2022 Ford Bronco V6-2.7L EcoBoost
• Dyno Proven gains of up to 26 hp and 27 lb.-ft. of torque
• Custom tapered dual intake tube for increased airflow to both turbos
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• No Tune Required - Designed to work seamless with the stock calibration
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes their patented Twist-Lock Filter attachment system
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Fully serviceable Injen 8-Layer Oiled Cotton Gauze Air Filter
• Replacement air filter # X-1116-BR
• Optional Air Filter Cleaning Kit also Available - X-1030
• Also available with a SuperNano-Web dry air Filter: Intake system P/N EVO9301
• Stainless steel band clamps with inner protective liner
• Aggressive under hood appearance while maintaining an OE fit
• Their clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances
• Made in Pomona California, USA
• Injen Technology Limited Lifetime Warranty

This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Description

The hype behind the launch of the all-new Ford Bronco was unreal. Now that you finally have that new Ford Bronco in your hands, it’s time to turn up the juice and add some easy power with the help of Injen Technology.

Injen Technology’s new EVO9301C Cold Air Intake for the 2021-2022 Ford Bronco’s equipped with the 2.7L V6 EcoBoost engine is here and one look at the stats of this intake system and you’ll know that it’s the right choice for your new Bronco. The EVO9301C is a true 3D designed intake system that simply drops-in without any modifications, plus it delivers on those performance gains without the need for additional and expensive engine tuners. Simply install their intake system and you’re set with no check engine lights and no drama!

The EVO9301C uses a custom tapered dual intake tube that starts out at 5.00 inches at the inlet and smoothly tapers down to feed those hungry turbos. This tapered design allows for huge increases in air volume for increased performance and maximum efficiency across the entire RPM band.

If you plan to off-road more often and hit fine silt, the Red 8-layer oiled cotton gauze filter is your best option.

Housing and Ram Air Scoop made from Roto-Molded XLPE:
The EVO9301C system features their 1-piece box design that incorporates their patented Twist Lock air filter attachment technology. The box is molded into their fully functional ram air scoop that is twice the size of OE. This increase allows their intake to capture the maximum amount of cool air to feed those hungry turbos.

Intake Tubes made from Roto-Molded XLPE:
The EVO9301C Evolution Cold Air Intake System uses custom designed and dyno-tuned intake tubes to produce huge power gains while retaining an OE quality fit. The dual intake tube starts out at a whopping 5.00in and smoothly tapers down into both turbos for increased air volume and reduced restriction.

8-Layer Oiled Cotton Gauze Air Filter:
The Injen 8-Layer oil cotton gauze air filter is included with the EVO9301C cold air intake. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple.

Quality Hardware:
From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.

Hassle-Free Installation:
Make it easy! By designing this kit in a 3D workspace, you’re ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.

Dyno Proven:
Plain and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your 2.7L Twin Turbo equipped Ford Bronco. After hours of designing and dyno testing, Injen is proud to say that the EVO9301C Evolution Air Intake system puts down numbers of up to 26 additional horsepower and 27 Ft.-lbs. of torque.

Boasting a simple install, patented air filter mounting system, cross-linked XLPE construction, enlarged front-facing scoop that is over twice the size of OE, and an adaption point on the side of the airbox for Injen’s upcoming snorkel. Add to that some the highest dyno-proven horsepower gains on the market, the clear choice for your Bronco is the EVO9301C by Injen Technology.